One of the most popular "waterproofing" systems is the installation of Drain Tile. Basically a trench is excavated around the walls of your basement and a perforated pipe is installed and new floor is poured over the pipe. The pipe drains to a tank in the floor which gets pumped outside when filled with water.
Another popular system, used with block walls, involves drilling holes near the floor into the blocks. The theory behind this is that the blocks fill with water and the holes will help with drainage. A plastic channel is fastened to the wall to capture the water and drain into a tank similar to the drain tile system.
Both of these systems have serious red flags including:
Pump failure....It doesn't take much, an old pump (remember these are usually sitting in the bottom of a tank full of water), dirty water, rocks, string can all spell disaster.
Moist basement....These systems are still letting the water in providing a nice place for mold to grow and that damp, musty odor to flourish
Erosion of the foundation....While draining water these systems are also pumping out dirt and gravel that was once around the foundation. Over time you are slowly destroying the foundation of your home and providing an easier path for water to get in. Ever noticed how sidewalks next to older homes always seem to be sloping towards the house? The foundation has washed away allowing the sidewalk to sink and at the same time increasing the amount of water into the basement.
The leak must be at the floor level....In theory these systems seem great but what if the water is coming in half way up the wall? Neither will be able to capture this water and properly get rid of it.
Around 40% of our installations are homes or pits with existing drain tile or drain cove systems. Either the owner was fed up with the maintenance required or the system was not working properly or it was running all the time. By stopping the water before it can even get in, we truly waterproof and don't water manage.